Table of Contents
Advertisement
Figure 75. Removing the processor bracket
Next steps
Install the processor into a processor and heat sink
Installing the processor into a processor and heat sink
module
Prerequisites
Follow the safety guidelines listed in
Steps
1. Place the processor in the processor tray.
NOTE:
Ensure that the pin 1 indicator on the processor tray is aligned with the pin 1 indicator on the processor.
2. Flex the outer edges of the bracket around the processor ensuring that the processor is locked into the clips on the bracket.
NOTE:
Ensure that the pin 1 indicator on the bracket is aligned with the pin 1 indicator on the processor before
placing the bracket on the processor.
NOTE:
Ensure that the processor and the bracket are placed in the tray before you install the heat sink.
module.
Safety
instructions.
Installing and removing system components
129
Advertisement
Table of Contents
