Entering User Tables - GE Moisture Image 1 Series Programming Manual

April 2004

Entering User Tables

4-14
To support user functions, the Series 1 can hold up to five tables
(designated as A through E) of non-linear or empirical data. Users can
enter up to 16 X-Y pairs in each table. A user function can supply an
X value with Tbl(). The Series 1 then interpolates the Y value for a
given X, and substitutes it for Tbl (X) in the function. (See the section
Entering User-Defined Tables on page 3-13.)
To enter values for a user table:
1. From the "New Meter Browser" option, click on the desired
communications port and meter.
2. Click on "User Tables," and then double-click on the desired
table.The right side of the screen appears similar to Figure 4-9.
Figure 4-9: User Table Window
3. Enter a name (up to 13 characters) for the table in the "Table
Name" text box, and enter up to 16 X and Y values in the
appropriate columns.The table now appears similar to Figure 4-10.
Figure 4-10: Completed User Table
4. When you have finished entering values, click on [
the table immediately, and on [
the window. To return the window to its previous settings, click on
the [ ] button.
Cancel
Apply
] to confirm the table and close
OK
Programming with PanaView
] to apply