Setting The Clock And Calendar - GE Moisture Image 1 Series Programming Manual

Setting the Clock and
Calendar
Basic Programming
Press the keys in Table 2-11 to reset the clock and calendar; then
follow the steps below. The screen appears similar to Figure 2-21
below. Figure 3-18 on page 3-31 for a menu map.
Table 2-11: Moving from System Service to Main Menu
Press the following menu keys:
SETTINGS
SERVICE
*The Settings Menu will prompt for a passcode (see page 2-6).
Use the following steps to set the clock and calendar:
1. Press the CLOCK menu key. The hours are highlighted.
2. Enter the digits for the month, day, year, hours (0-23), minutes,
and seconds. If you do not want to change a part of the time or
date, press the pointer to skip over it until you complete entering
the year.
3. To exit, press the DONE menu key until Main Menu appears on
the message line.
1 Dew Point
-18.0 °C
2 Temperature
+35.9 °C
3 H O
2
+0.535 ppm
v
System Service Menu
HELP REFS
Figure 2-21: Setting the Clock/Calendar
To enter the:
Settings Menu
System Service Menu
4 Oxygen
48.3 ppb
v
5 Pressure
27.10 PSIG
X Unassigned
11:35 01/22/2000
CLOCK DONE
April 2004
pg:1
2-41