Entering User Tables - GE Moisture monitor series 3 Programming Manual

Entering User Tables

Programming with PanaView
To support user functions, the MMS-3 can hold up to five tables
(designated as A through E) of non-linear or empirical data. Users can
enter up to 16 X-Y pairs in each table. A user function can supply an
X value with Tbl(). The MMS-3 then interpolates the Y value for a
given X, and substitutes it for Tbl (X) in the function.
To enter values for a user table:
1. From the "New Meter Browser" option, click on the desired
communications port and meter.
2. Click on "User Tables," and then double-click on the desired
table.The right side of the screen appears similar to Figure 4-8
below.
Figure 4-8: Blank User Table
3. Enter a name (up to 13 characters) for the table in the "Table
Name" text box, and enter up to 16 X and Y values in the
appropriate columns.The table now appears similar to Figure 4-9
below.
Figure 4-9: Completed User Table
4. When you have finished entering values, click on
the table immediately, and on [OK] to confirm the table and close
the window. To return the window to its previous settings, click on
[Cancel]
the button.
March 2008
[Apply]
to apply
4-11