Adjusting The Contrast Of The Screen - GE Moisture Image 1 Series Programming Manual

Hygrometer
Hide thumbs Also See for Moisture Image 1 Series:
Table of Contents

Advertisement

April 2004
Adjusting the Contrast
of the Screen
2-40
To adjust the screen contrast, press the keys in Table 2-10 below. The
screen appears similar to Figure 2-20. Figure 3-18 on page 3-31 for a
menu map.
Press the INCR menu key to increase the contrast. Press the DECR
menu key to decrease the contrast. Hold INCR or DECR down for
large changes or press repeatedly for small changes.
To exit, press the DONE menu key until Main Menu appears on the
message line.
Table 2-10: Moving from Contrast Adjust to Main Menu
Press the following menu keys:
OPTIONS
SCREEN
CONTRAST
1
Dew Point
-18.0 °C
2 Temperature
+35.9 °C
3
H
O
2
+0.535 ppm
Contrast Adjust Menu
HELP
DECR
Figure 2-20: Contrast Adjust Menu
Note: The screen in Figure 2-20 above will appear in either the
matrix format or a line graph, depending on the screen setup.
To enter the:
Option Menu
Screen Menu
Contrast Adjust Menu
4 Oxygen
48.3 ppb
5 Pressure
27.10 PSIG
X Unassigned
v
11:35
INCR
v
01/22/2000
pg: 1
DONE
Basic Programming

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Moisture Image 1 Series and is the answer not in the manual?

This manual is also suitable for:

Mis 1

Table of Contents