Introduction; Changing Measurement Modes And Units - GE Moisture Image 1 Series Programming Manual

Introduction

Changing
Measurement Modes
and Units
Programming with PanaView
The optional PanaView software package enables you to remotely
change the programming of the Series 1. In addition to displaying
meter measurements on your PC, you can vary the modes and display
units on individual pages and channels, and add, change or delete user
equations and user tables. For a complete explanation of PanaView's
capabilities, see the PanaView User's Manual.
IMPORTANT: Before attempting to display or change programming
via the PC, be sure to install PanaView as described
in Chapter 1 of the PanaView User's Manual.
PanaView enables you to actually change the measurements on the
matrix display. For example, through the PC, you can switch a
window on page 2 from its original programming of measuring
oxygen in parts-per-million on Channel 2 to new programming of
measuring pressure at psig on Channel 3 — or leave the window
entirely blank.
April 2004
4-1