GE Moisture Image 1 Series Programming Manual page 89

Description of a Sample
Output (cont.)
Advanced Programming
Data
Data is the actual measurement. The number of digits and the position
of the decimal point, if any, will vary with the magnitude and type of
data (see Table 3-9 on page 3-26 for number formats for each mode/
units). Signed values will contain a leading plus (+) or minus (-) sign.
Unsigned values (percent oxygen, for example) have no sign. The
data is always followed by two ASCII spaces.
<CR/LF>
Every record is terminated with a carriage return/line feed pair
(ASCII 13 and 10 decimal, 0D and 0A hexadecimal).
June 2003
3-25