User Program - GE Moisture Image 1 Series Programming Manual

User Program

Features and Capabilities
The Series 1 has a user program that is accessed and controlled by the
keypad (to the right of the LCD screen) and the four menu keys
(located under the LCD screen).The user program enables the user to
enter the necessary probe data, set up the LCD screen, and control the
other operational features. The meter stores this data in battery-
backed RAM for up to five years, even if power is off.
The user program consists of the following four main menus:
•
HELP - provides on-line help for the various menus within the user
program.
•
SELECT - lets the user select the type of measurement and units to
display.
•
SETTINGS - enables the user to enter probe data and set up basic
functions such as recorders and alarms.
•
OPTIONS - enables the user to set up the Series 1 screen to display
measurements in matrix or graphic format and perform advanced
functions.
The Settings Menu prompts the user to enter a passcode (see Entering
the Passcode in Chapter 2).
All the functions and features of the Series 1 program are discussed in
Chapters 2 and 3, Basic Programming and Advanced Programming.
June 2003
1-9