GE Moisture Image 1 Series Programming Manual page 55

April 2004
Setting Up the X and Y
Axis for a Line Graph
2-36
Figure 3-18 on page 3-31 for a menu map.
1. At the Graph Screen Menu (see Table 2-7), press the SCALE
menu key, and then the SCALE X and Y axis menu key.
2. The Series 1 prompts for the minimum Y axis. Enter the minimum
value to be displayed, and press [YES].
3. The meter then prompts for the maximum Y axis. Enter the
maximum value to be displayed, and press [YES].
4. Press the X AXIS (horizontal axis) menu key.
5. Enter the time in minutes, and press [YES]. The Series 1 accepts
any value from 1 to 2160 minutes (36 hours).
6. Press the DONE menu key until Main Menu appears on the
message line.
Basic Programming