Table of Contents
Advertisement
Regulatory information
United States (FCC)
XBee/XBee-PRO S2C 802.15.4 RF Modules comply with Part 15 of the FCC rules and regulations.
Compliance with the labeling requirements, FCC notices and antenna usage guidelines is required.
To fulfill FCC Certification, the OEM must comply with the following regulations:
1. The system integrator must ensure that the text on the external label provided with this
device is placed on the outside of the final product.
2. RF Modules may only be used with antennas that have been tested and approved for use with
the modules.
OEM labeling requirements
WARNING! As an Original Equipment Manufacturer (OEM) you must ensure that FCC
labeling requirements are met. You must include a clearly visible label on the outside of the
final product enclosure that displays the following content:
Required FCC Label for OEM products containing the XBee-PRO S2C SMT RF
Module
Contains FCC ID: MCQ-PS2CSM
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1.) this device may not cause harmful interference and (2.) this device must accept any
interference received, including interference that may cause undesired operation.
Required FCC Label for OEM products containing the XBee S2C TH RF Module
Contains FCC ID: MCQ-S2CTH
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1.) this device may not cause harmful interference and (2.) this device must accept any
interference received, including interference that may cause undesired operation.
Required FCC Label for OEM products containing the XBee-PRO S2C TH RF Module
Contains FCC ID: MCQ-PS2CTH
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1.) this device may not cause harmful interference and (2.) this device must accept any
interference received, including interference that may cause undesired operation.
FCC notices
IMPORTANT: XBee/XBee-PRO S2C 802.15.4 RF Modules have been certified by the FCC for use with
other products without any further certification (as per FCC section 2.1091). Modifications not
expressly approved by Digi could void the user's authority to operate the equipment.
IMPORTANT: OEMs must test final product to comply with unintentional radiators (FCC section 15.107
& 15.109) before declaring compliance of their final product to Part 15 of the FCC Rules.
IMPORTANT: The RF module has been certified for remote and base radio applications. If the module
will be used for portable applications, the device must undergo SAR testing.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
XBee/XBee-PRO S2C 802.15.4 RF Module User Guide
United States (FCC)
142
Advertisement
Table of Contents
