Agency Certifications; United States Fcc; Oem Labeling Requirements - Digi XBee ZigBee S2D User Manual

Agency certifications

United States FCC

The XBee RF Modules comply with Part 15 of the FCC rules and regulations. Compliance with the labeling
requirements, FCC notices and antenna usage guidelines is required.
To fulfill FCC Certification, the OEM must comply with the following regulations:
1. The system integrator must ensure that the text on the external label provided with this device is placed on the
outside of the final product.
2. XBee ZB RF Modules may only be used with antennas that have been tested and approved for use with the
modules [refer to the antenna tables in this section].

OEM Labeling Requirements

WARNING!
Required FCC Label for OEM products containing the XBee S2C SMT RF Module Model: S2D SMT
Contains FCC ID: MCQ-S2DSM
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1.)
this device may not cause harmful interference and (2.) this device must accept any interference received,
including interference that may cause undesired operation.
Required FCC Label for OEM products containing the XBee S2C SMT RF Module
Contains FCC ID: MCQ-XBS2C
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1.)
this device may not cause harmful interference and (2.) this device must accept any interference received,
including interference that may cause undesired operation.
XBee/XBee-PRO ZigBee RF Modules User Guide
The Original Equipment Manufacturer (OEM) must ensure that FCC labeling requirements are met. This
includes a clearly visible label on the outside of the final product enclosure that displays the contents
shown in the figure below.
203