Table of Contents
Advertisement
Hardware
Through-hole keepout
Notes
1. We recommend non-metal enclosures. For metal enclosures, use an external antenna.
2. Keep metal chassis or mounting structures in the keepout area at least 2.54 cm (1 in) from the
antenna.
3. Maximize the distance between the antenna and metal objects that might be mounted in the
keepout area.
4. These keepout area guidelines do not apply for wire whip antennas or external RF connectors.
Wire whip antennas radiate best over the center of a ground plane.
XBee/XBee-PRO S2C 802.15.4 RF Module User Guide
Design notes
25
Advertisement
Table of Contents
