United States (Fcc); Oem Labeling Requirements - Digi XBee-PRO S2C Zigbee User Manual

Regulatory information

United States (FCC)

XBee/XBee-PRO Zigbee RF Modules comply with Part 15 of the FCC rules and regulations. Compliance
with the labeling requirements, FCC notices and antenna usage guidelines is required.
To fulfill FCC Certification, the OEM must comply with the following regulations:
1. The system integrator must ensure that the text on the external label provided with this
device is placed on the outside of the final product.
2. RF Modules may only be used with antennas that have been tested and approved for use with
the modules.

OEM labeling requirements

WARNING! As an Original Equipment Manufacturer (OEM) you must ensure that FCC
labeling requirements are met. You must include a clearly visible label on the outside of
the final product enclosure that displays the following content:
Required FCC Label for OEM products containing the XBee S2D SMT RF Module
Contains FCC ID: MCQ-S2DSM
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1.) this device may not cause harmful interference and (2.) this device must accept any
interference received, including interference that may cause undesired operation.
Required FCC Label for OEM products containing the XBee S2C SMT RF Module
Contains FCC ID: MCQ-XBS2C
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1.) this device may not cause harmful interference and (2.) this device must accept any
interference received, including interference that may cause undesired operation.
Required FCC Label for OEM products containing the XBee-PRO S2C SMT RF
Module
Contains FCC ID: MCQ-PS2CSM
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1.) this device may not cause harmful interference and (2.) this device must accept any
interference received, including interference that may cause undesired operation.
Note Legacy XBee-PRO SMT (Model: PRO S2C; hardware version 21xx) has FCC ID: MCQ-XBPS2C.
Required FCC Label for OEM products containing the XBee S2C TH RF Module
Contains FCC ID: MCQ-S2CTH
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1.) this device may not cause harmful interference and (2.) this device must accept any
interference received, including interference that may cause undesired operation.
Required FCC Label for OEM products containing the XBee-PRO S2C TH RF Module
Contains FCC ID: MCQ-PS2CTH
XBee/XBee-PRO® S2C Zigbee® RF Module
United States (FCC)
266