Table of Contents
Advertisement
AT commands
Parameter
0
1
2
3
4
5
Default
1
D8 (DIO8/SLEEP_REQUEST)
Sets or displays the DI8/DTR/SLP_RQ configuration (TH pin 9/SMT pin 10).
This line is also used with Pin Sleep, but pin sleep ignores the D8 configuration. It is always used to
control pin sleep, regardless of configuration of D8.
Note
When using Pin sleep, the internal pull up/down resistor is not used
Parameter range
0, 3
Parameter
0
1
2
3
4
5
Default
0
P0 (RSSI/PWM0 Configuration)
Sets or displays the RSSI/PWM0 configuration ().
This command enables the option of translating incoming data to a PWM so that the output can be
translated back into analog form.
If the IA (I/O Input Address) parameter is correctly set and P0 is configured as PWM0 output, incoming
AD0 samples automatically modify the PWM0 value.
XBee/XBee-PRO S2C 802.15.4 RF Module User Guide
Description
Disabled
Associate LED indicator - blinks when associated
N/A
Digital input
Digital output, default low
Digital output, default high
Description
Disabled
N/A
N/A
Digital input
N/A
N/A
I/O settings commands
92
Advertisement
Table of Contents
