United States Fcc; Labeling Requirements; Maximum Power And Frequency Specifications (Fcc) - Digi ConnectCore 8X Hardware Reference Manual

Regulatory information and certifications

United States FCC

The ConnectCore 8X module complies with Part 15 of the FCC rules and regulations. Compliance with
the labeling requirements, FCC notices and antenna usage guidelines is required. To fulfill FCC
Certification, the OEM must comply with the following regulations:
The system integrator must ensure that the text on top side of the module is placed on the outside of
the final product.
The ConnectCore 8X module may only be used with approved antennas. (See
antennas.)

Labeling requirements

WARNING! The Original Equipment Manufacturer (OEM) must ensure that FCC labeling
requirements are met. This includes a clearly visible label on the outside of the final
product enclosure that displays the contents shown below. Required FCC Label for OEM
products containing the ConnectCore 8X module.
Contains FCC ID: MCQ-CCIMX8
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.

Maximum power and frequency specifications (FCC)

Peak
RF antenna
band gain
2.4 2.5 dBi
GHz
ConnectCore® 8X System-on-Module Hardware Reference Manual
Channel
Technology bandwidth
BT + EDR 1
Bluetooth LE
2
WLAN 20
40
FCC-approved
Channel number (Center frequency, MHz)
79 non-overlapping channels: 0 (2400) to 78
(2480)
40 non-overlapping channels: 0 (2402) to 39
(2480)
1(2412), 2(2417), 3(2422), 4(2427), 5(2432), 6
(2437), 7(2442), 8(2447), 9 (2452), 10(2457), 11
(2462)
3(2422), 4(2427), 5(2432), 6(2437), 7(2442), 8
(2447), 9(2452)
United States FCC
107