Table of Contents
Advertisement
AT commands
Bit Meaning
0
Allow PanId
reassignment
1
Allow Channel
reassignment
Auto Associate
2
3
Poll coordinator on pin
wake
4 -
Reserved
7
Default
0
A2 (Coordinator Association)
Sets or displays the Coordinator association options.
Parameter range
0 - 7 (bit field)
Bit field:
Bit Meaning
Allow Pan ID
0
reassignment
Allow Channel
1
reassignment
Allow
2
Association
3 -
Reserved
7
XBee/XBee-PRO S2C 802.15.4 RF Module User Guide
Setting Description
0
Only associates with Coordinator operating on PAN ID that
matches device ID.
1
May associate with Coordinator operating on any PAN ID.
Only associates with Coordinator operating on matching CH
0
channel setting.
1
May associate with Coordinator operating on any channel.
0
Device will not attempt association.
1
Device attempts association until success.
0
Pin Wake does not poll the Coordinator for indirect (pending)
data.
1
Pin Wake sends Poll Request to Coordinator to extract any
pending data.
Setting Description
0
Coordinator will not perform Active Scan to locate available PAN ID.
It operates on ID (PAN ID).
Coordinator performs an Active Scan to determine an available ID
1
(PAN ID). If a PAN ID conflict is found, the ID parameter will change.
Coordinator will not perform Energy Scan to determine free channel.
0
It operates on the channel determined by the CH parameter.
1
Coordinator performs an Energy Scan to find the quietest channel,
then operates on that channel.
0
Coordinator will not allow any devices to associate to it.
1
Coordinator allows devices to associate to it.
Networking and security commands
77
Advertisement
Table of Contents
