Examples - Digi XBee S2C 802.15.4 User Manual

Operate in API mode
Offset Size
13 8-bit
14-n variable RF data
EOF 8-bit

Examples

Each example is written without escapes (AP = 1) and all bytes are represented in hex format. For
brevity, the start delimiter, length, and checksum fields have been excluded.
64-bit unicast
A device with the 64-bit address of 0013A20087654321 sent a unicast transmission to a specific
device with the payload of "TxData". The following frame is emitted if the destination is configured
with AO = 2.
7E 00 11 80 00 13 A2 00 12 34 56 78 5E 01 54 78 44 61 74 61 11
Frame type
0x80
Output
XBee/XBee-PRO S2C 802.15.4 RF Module User Guide
Frame
Field Description
Options Bit field of options that apply to the received message:
Bit 0: Reserved
n
Bit 1: Packet was sent as a broadcast [0x02]
n
Bit 2: 802.15.4 only - Packet was broadcast across all PANs
n
[0x04]
Note Option values may be combined.
The RF payload data that the device receives.
Checksum 0xFF minus the 8-bit sum of bytes from offset 3 to this byte (between
length and checksum).
64-bit source RSSI
0x0013A200
0x5E
87654321
-94 dBm
Rx options Received data
0x01 0x547844617461
ACK was sent "TxData"
Frame descriptions
123