Sc (Scan Channels); Sd (Scan Duration) - Digi XBee S2C 802.15.4 User Manual

AT commands
Default
0

SC (Scan Channels)

Sets or displays the list of channels to scan for all Active and Energy Scans as a bit field. This affects
scans initiated in the AS (Active Scan) and ED (Energy Scan) commands in Command mode and during
End Device Association and Coordinator startup.
Parameter range
0 - 0xFFFF (bit field)
Bit field mask:
Bit Parameter
0 0x0B (not available on XBee-PRO)
1 0x0C
2 0x0D
3 0x0E
4 0x0F
5 0x10
6 0x11
7 0x12
8 0x13
9 0x14
10 0x15
11 0x16
12 0x17
13 0x18 (not available on XBee-PRO)
14 0x19 (not available on XBee-PRO)
15 0x1A (not available on XBee-PRO)
Default
0x1FFE

SD (Scan Duration)

Sets or displays the scan duration exponent.
Coordinator: If you set the ReassignPANID option on the coordinator (refer to
Association)), SD determines the length of time the coordinator scans channels to locate existing
XBee/XBee-PRO S2C 802.15.4 RF Module User Guide
Networking and security commands
A2 (Coordinator
75