Dp (Disassociated Cyclic Sleep Period); So (Sleep Options); Serial Interfacing Commands - Digi XBee S2C 802.15.4 User Manual

AT commands
Default
0

DP (Disassociated Cyclic Sleep Period)

Sets or displays the sleep period for cyclic sleeping remotes that are configured for Association but
that are not associated to a Coordinator. For example, if a device is configured to associate and is
configured as a Cyclic Sleep remote, but does not find a Coordinator, it sleeps for DP time before
reattempting association.
Parameter range
1 - 0xFFFF
Default
0x3E8 (10 seconds)

SO (Sleep Options)

Set or read the sleep options bit field of a device. This command is a bitmask.
You can set or clear any of the available sleep option bits.
Parameter range
0 - 0x3
Bit field:
Bit Setting Meaning
0x01 0
1
0x02 0
1
Set all other option bits to 0.
Default
0

Serial interfacing commands

The following AT commands are serial interfacing commands.
XBee/XBee-PRO S2C 802.15.4 RF Module User Guide
Description
Normal A device configured for cyclic sleep will poll for data on waking
operations
Disable A device configured for cyclic sleep will not poll for data on waking
wakeup poll
Normal A device configured in a sleep mode with ADC/DIO sampling
operations enabled will automatically perform a sampling on wakeup
Suppress A device configured in a sleep mode with ADC/DIO sampling
sample on enabled will not automatically sample on wakeup
wakeup

Serial interfacing commands

85