Table of Contents
Advertisement
Revision history—90001500
Revision
Date
G
May 2018
H
June 2018
J
May 2019
K
May 2019
L
July 2019
Trademarks and copyright
Digi, Digi International, and the Digi logo are trademarks or registered trademarks in the United
States and other countries worldwide. All other trademarks mentioned in this document are the
property of their respective owners.
© 2018 Digi International Inc. All rights reserved.
Disclaimers
Information in this document is subject to change without notice and does not represent a
commitment on the part of Digi International. Digi provides this document "as is," without warranty of
any kind, expressed or implied, including, but not limited to, the implied warranties of fitness or
merchantability for a particular purpose. Digi may make improvements and/or changes in this manual
or in the product(s) and/or the program(s) described in this manual at any time.
Warranty
To view product warranty information, go to the following website:
www.digi.com/howtobuy/terms
Customer support
Gather support information: Before contacting Digi technical support for help, gather the following
information:
Product name and model
Product serial number (s)
Firmware version
Operating system/browser (if applicable)
Logs (from time of reported issue)
Trace (if possible)
Description of issue
Steps to reproduce
XBee/XBee-PRO S2C 802.15.4 RF Module User Guide
Description
Added note on range estimation. Changed IC to ISED.
Changes to the Active Scan command.
Removed Brazilian certification information.
Added FCC publication 996369 related information.
Added the NP command. Added RS-485 support.
2
Advertisement
Table of Contents
