Appendix A: Agency Certifications; United States Fcc; Oem Labeling Requirements; Fcc Notices - Digi PS2CSM Product Manual

Appendix A: Agency Certifications

United States FCC

The XBee RF Modules comply with Part 15 of the FCC rules and regulations. Compliance with the labeling
requirements, FCC notices and antenna usage guidelines is required.
To fulfill FCC Certification, the OEM must comply with the following regulations:

OEM Labeling Requirements

FCC Notices

IMPORTANT: The XBee and XBee-PRO RF Modules have been certified by the FCC for use with other
products without any further certification (as per FCC section 2.1091). Modifications not expressly
approved by Digi could void the user's authority to operate the equipment.
IMPORTANT: OEMs must test final product to comply with unintentional radiators (FCC section 15.107 &
15.109) before declaring compliance of their final product to Part 15 of the FCC Rules.
© 2014 Digi International Inc.
1.The system integrator must ensure that the text on the external label provided with this
device is placed on the outside of the final product.
2.XBee ZB RF Modules may only be used with antennas that have been tested and approved for
use with the modules [refer to the antenna tables in this section].
WARNING: The Original Equipment Manufacturer (OEM) must ensure that FCC labeling
requirements are met. This includes a clearly visible label on the outside of the final product
enclosure that displays the contents shown in the figure below.
Required FCC Label for OEM products containing the XBee S2C SMT RF Module
Contains FCC ID: MCQ-XBS2C
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1.) this device may not cause harmful interference and (2.) this device must accept any interference
received, including interference that may cause undesired operation.
Required FCC Label for OEM products containing the XBee-PRO S2C SMT RF Module
Contains FCC ID:MCQ-PS2CSM
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1.) this device may not cause harmful interference and (2.) this device must accept any interference
received, including interference that may cause undesired operation.
Note: Legacy XBee-PRO SMT (hardware version 21xx) has FCC ID: MCQ-XBPS2C
Required FCC Label for OEM products containing the XBee S2C TH RF Module
Contains FCC ID:MCQ-S2CTH
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1.) this device may not cause harmful interference and (2.) this device must accept any interference
received, including interference that may cause undesired operation.
Required FCC Label for OEM products containing the XBee-PRO S2C TH RF Module
Contains FCC ID: MCQ-PS2CTH
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1.) this device may not cause harmful interference and (2.) this device must accept any interference
received, including interference that may cause undesired operation.
166