Table of Contents
Advertisement
Configure the XBee/XBee-PRO S2C 802.15.4 RF Module
1. Navigate to digi.com/xbeenetworkassistant.
2. Click General Diagnostics, Utilities and MIBs.
3. Click the XBee Network Assistant - Windows x86 link.
4. When the file finishes downloading, run the executable file and follow the steps in the XBee
Network Assistant Setup Wizard.
XBee Multi Programmer
The XBee Multi Programmer is a combination of hardware and software that enables partners and
distributors to program multiple Digi Radio frequency (RF) devices simultaneously. It provides a fast
and easy way to prepare devices for distribution or large networks deployment.
The XBee Multi Programmer board is an enclosed hardware component that allows you to program up
to six RF modules thanks to its six external XBee sockets. The XBee Multi Programmer application
communicates with the boards and allows you to set up and execute programming sessions. Some of
the features include:
Each XBee Multi Programmer board allows you to program up to six devices simultaneously.
n
Connect more boards to increase the programming concurrency.
Different board variants cover all the XBee form factors to program almost any Digi RF device.
n
Download the XBee Multi Programmer application
See the
XBee Multi Programmer User Guide
XBee/XBee-PRO S2C 802.15.4 RF Module User Guide
from: digi.com/support/productdetail?pid=5641
for more information.
XBee Multi Programmer
31
Advertisement
Table of Contents
