Table of Contents
Advertisement
Operate in API mode
64-bit Receive Packet - 0x80
Request frames:
Transmit Request - 0x10
n
Explicit Addressing Command Request - 0x11
n
64-bit Transmit Request - 0x00
n
16-bit Transmit Request - 0x01
n
Description
This frame type is emitted when a device configured with legacy API output— = 2—receives an RF
data packet from a device configured to use 64-bit source addressing—MY = 0xFFFE.
Note
This frame format is deprecated and should only be used by customers who require
compatibility with legacy Digi RF products. For new designs, we encourage you to use
frame - 0x90
for reception of API transmissions.
Format
The following table provides the contents of the frame. For details on frame structure, see
specifications.
Offset Size
0
8-bit
1
16-bit
3
8-bit
4
64-bit
12
8-bit
XBee/XBee-PRO S2C 802.15.4 RF Module User Guide
Frame
Field
Description
Start
Indicates the start of an API frame.
Delimiter
Length
Number of bytes between the length and checksum.
64-bit Receive Packet - 0x80
Frame
type
The sender's 64-bit IEEE address.
64-bit
source
address
RSSI
Received Signal Strength Indicator. The Hexadecimal equivalent of (-
dBm) value. For example if RX signal strength is -40 dBm, then 0x28
(40 decimal) is returned.
Frame descriptions
Receive Packet
API frame
122
Advertisement
Table of Contents
