P1 (Pwm1 Configuration); P2 (Spi_Miso) - Digi XBee S2C 802.15.4 User Manual

AT commands
Parameter range
0 - 2
Parameter
0
1
2
Default
1

P1 (PWM1 Configuration)

Sets or displays the PWM1 configuration (TH pin 7/SMT pin 8).
If IA (I/O Input Address) is correctly set and P1 is configured as PWM1 output, incoming AD0 samples
automatically modify the PWM1 value.
Parameter range
0, 2
Parameter
0
2
Default
0

P2 (SPI_MISO)

Sets or displays the SPI_MISO configuration (TH pin 4/SMT pin 17). This only applies to through-hole
devices.
Parameter range
0 - 1
Parameter
0
1
Default
0
XBee/XBee-PRO S2C 802.15.4 RF Module User Guide
Description
Disabled
RSSI PWM0 output
PWM0 output
Description
Disabled
PWM1 output
Description
Disabled
SPI_MISO
I/O settings commands
93