D6 (Dio6/Rts); Ap (Api Enable) - Digi XBee S2C 802.15.4 User Manual

AT commands
Parameter range
0, 1, 3 - 7
Parameter Description
0 Disabled
CTS flow control
1
2 N/A
3 Digital input
4 Digital output, low
5 Digital output, high
6 RS-485 Tx enable, low Tx (0 V on transmit, high when idle)
7 RS-485 Tx enable high, high Tx (high on transmit, 0 V when idle)
Default
0x1

D6 (DIO6/RTS)

Sets or displays the DIO6/RTS configuration (TH pin 16/SMT pin 29).
Parameter range
Parameter
0
1
2
3
4
5
Default
0

AP (API Enable)

Set or read the API mode setting. The device can format the RF packets it receives into API frames
and send them out the serial port.
When you enable API, you must format the serial data as API frames because Transparent operating
mode is disabled.
Enables API Mode.
XBee/XBee-PRO S2C 802.15.4 RF Module User Guide
Description
Disabled
RTS flow control
N/A
Digital input
Digital output, low
Digital output, high
Serial interfacing commands
88