Digi XBee S2C 802.15.4 User Manual page 139

Operate in API mode
Offset Size
18-n variable Parameter
EOF 8-bit
Examples
Each example is written without escapes (AP = 1) and all bytes are represented in hex format. For
brevity, the start delimiter, length, and checksum fields have been excluded.
Set remote command parameter
Host set the NI string of a remote device to "Remote" using
The corresponding 0x97 Remote AT Command Response with a matching Frame ID is emitted as a
response:
7E 00 0F 97 27 00 13 A2 00 12 34 56 78 12 7E 4E 49 00 51
Frame
type Frame ID
0x97 0x27
Response Matches
request
Transmission failure
Host queued the the PAN ID change of a remote device using
Due to existing network congestion, the host will retry any failed attempts.
The corresponding 0x97 Remote AT Command Response with a matching Frame ID is emitted as a
response:
7E 00 0F 97 27 00 13 A2 00 12 34 56 78 FF FE 49 44 04 EA
Frame
type Frame ID
0x97 0x27
Response Matches
request
Query remote command parameter
Query the temperature of a remote device—.
XBee/XBee-PRO S2C 802.15.4 RF Module User Guide
Frame Field Description
If the host requested a command parameter change, this field will
be omitted.
value
If the host queried a command by omitting the parameter value in
(optional)
the request, this field will return the value currently set on the
device.
Checksum 0xFF minus the 8-bit sum of bytes from offset 3 to this byte
(between length and checksum).
64-bit 16-bit
source source
0x0013A200 0x127E
12345678
Network
address
64-bit 16-bit
source source
0x0013A200 0xFFFE
12345678
Unknown "ID"
a Remote AT Command Request -
AT Command
command Status
0x4E49 0x00
"NI" Success
a Remote AT Command Request -
AT Command
command Status
0x4944 0x04
Transmission
failure
Frame descriptions
0x17.
Command data
(omitted)
Parameter changes
return no data
0x17.
Command data
(omitted)
Parameter changes
return no data
139