Table of Contents
Advertisement
Agency certifications
United States FCC
The XBee ZNet 2.5 RF Module complies with Part 15 of the FCC rules and regulations. Compliance
with the labeling requirements, FCC notices and antenna usage guidelines is required.
To fulfill FCC Certification, the OEM must comply with the following regulations:
1. The system integrator must ensure that the text on the external label provided with this device is
placed on the outside of the final product.
2. The XBee ZNet 2.5 RF Module may only be used with antennas that have been tested and
approved for use with this module; refer to the antenna tables in this section.
OEM labeling requirements
The Original Equipment Manufacturer (OEM) must ensure that FCC labeling requirements are met.
This includes a clearly visible label on the outside of the final product enclosure that displays the
contents shown in the figure below.
Required FCC Label for OEM products containing the XBee ZNet 2.5 RF Module:
Contains FCC ID: OUR-XBEE2*
The enclosed device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (i.) this device may not cause harmful interference
and (ii.) this device must accept any interference received, including interference
that may cause undesired operation.
Required FCC Label for OEM products containing the XBee PRO ZNet 2.5 RF Module:
Contains FCC ID:MCQ-XBEEPRO2*
The enclosed device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (i.) this device may not cause harmful interference
and (ii.) this device must accept any interference received, including interference
that may cause undesired operation.
FCC notices
IMPORTANT: The XBee ZNet 2.5 and XBee PRO ZNet 2.5 RF Module have been certified by the FCC for
use with other products without any further certification (as per FCC section 2.1091).
Modifications not expressly approved by Digi could void the user's authority to operate the
equipment.
IMPORTANT: OEMs must test final product to comply with unintentional radiators (FCC section
15.107 and 15.109) before declaring compliance of their final product to Part 15 of the FCC Rules.
XBee ZNet 2.5 / XBee PRO Znet 2.5 OEM RF Modules Product Manual
United States FCC
98
Advertisement
Table of Contents
