Table of Contents
Advertisement
AT commands
Parameter
0x5
0x6
0x7
0x8
Default
0x03 (9600 b/s)
NB (Parity)
Set or read the serial parity settings for UART communications.
The device does not actually calculate and check the parity. It only interfaces with devices at the
configured parity and stop bit settings.
Parameter range
0x00 - 0x04
Parameter
0x00
0x01
0x02
0x03
Default
0x00
RO (Packetization Timeout)
Set or read the number of character times of inter-character silence required before transmission
begins when operating in Transparent mode. RF transmission will also commence when the maximum
payload (see
Maximum
Set RO to 0 to transmit characters as they arrive instead of buffering them into one RF packet.
Parameter range
0 - 0xFF (x character times)
Default
3
D7 (DIO7/CTS)
Sets or displays the DIO7/CTS configuration (TH pin 12/SMT pin 25).
XBee/XBee-PRO S2C 802.15.4 RF Module User Guide
Description
No parity
Even parity
Odd parity
Mark parity (forced high)
payload) is received in the DI buffer.
Serial interfacing commands
Description
38400 b/s
57600
115200 b/s
230400 b/s
87
Advertisement
Table of Contents
