Spindle Display Element; Display For Positioning Of Spindle; Driven Tool; Setting The Cutting Speed Or Spindle Speed - HEIDENHAIN MANUALPLUS 4110 Manual

Machine data display
Spindle display

Spindle display element:

Top line: Programmed cutting speed
or spindle speed
Bottom line:
Current speed override
Actual spindle speed (taking the
speed override into account)
Little number beside the S: Gear range
Units:
Cutting speed: m/min
Spindle speed: r/min

Display for positioning of spindle

(M19):
Top line: Target position
Bottom line: Current position

Driven tool:

Identification: The S is highlighted
The display refers to the driven tool

Setting the cutting speed or spindle speed:


Set a constant cutting speed (the constant spindle speed is deactivated)

Set a constant spindle speed
Spindle utilization
Spindle utilization display element:
Current performance of the spindle
motor relative to the rated motor
performance
Bottom line: Maximum speed (speed
limitation)
HEIDENHAIN MANUALplus 4110 System Operation
Spindle rotates counterclockwise (M3)
Spindle rotates clockwise (M4)
Spindle stop
3.4