Chapter 3 Replacement Procedure
3.1 Work Flow
Installation
Check the compatibility of
hardware in Chapter 2.
Remove GP/ST-3400
series.
Install GP-4401T.
Connect the power cord.
Check the performance
and start operation.
*1:
This step is required if screen data is saved only in the GP unit, not in any other device.
Screen
Receive screen data from
GP/ST-3400 series
*1
Change the received data
on GP-Pro EX.
Check and modify the data
on GP-Pro EX.
Transfer the screen data to
GP-4401T.
14/40
Communication
Check the connection
between GP-4401T and a
PLC in the GP-Pro EX
Device/PLC Connection
Manual.
Connect GP-4401T and
PLC with the PLC's cable.
Start connection and check
the communication.