You can also install the device in an equipment rack with the optional
RKMT-J15 bracket. The bracket lets you install two devices side-by-side.
Refer to Figure 18 on page 59.
Note
When mounting using the RKMT-J15 Bracket, you must leave 1 rack
unit (1U) of space between brackets.
Figure 18. GS980EM/10H Switch and PWR300 Power Supplies in the
Note
The RKMT-J15 Bracket is purchased separately.
For installation instructions refer to "Installing the Device in an Equipment
Rack with the RKMT-J15 Bracket" on page 65.
RKMT-J15 Bracket
GS980EM Series Installation Guide
59