Alarms/Errors; Acknowledgment Of An Alarm - GRUNDFOS ALLDOS Oxiperm C 164 Series Operation And Service Manual

Oxiperm 164 150-2500 g en

10 Alarms/Errors

10.1 10.1 Acknowledgment of an Acknowledgment of an
10.1 10.1 Acknowledgment of an 10.1 Acknowledgment of an Acknowledgment of an
alarm alarm
alarm alarm alarm
15.710010-V5.0
Example: alarm from NaClO 2 dosing controller
The following is output on the display:
A ON ACK 1/1
Dosing controller
NaClO 2
23-04-01
and the alarm LEDs item 12 (alarm on system) and item 16 (alarm on display) flash
simultaneously.
● ● ● ● ●
Acknowledgment of system alarm
Acknowledge by pressing the "F4" key.
➼
Alarm LEDs go off, the system can be restarted.
If several alarms are present, this can be recognized on the display at the top right,
e.g. 1/4 means that the last of four alarms is displayed.
Use the "Up" and "Down"
The system can only be restarted if all alarms have been acknowledged on the
display.
If a small arrow is displayed on the right side of the display, this menu consists of
several pages.
Scroll in the menu using the "Arrow left"
Enter variable values using the "Up"
numerical values) and the "Arrow left"
change input position).
Select and switch over the input fields using the "F1" key, cancel using the "Escape"
key .
22:56:39
keys to call and acknowledge the alarms.
and "Arrow right"
and "Down
and "Arrow right"
keys.
" keys (to modify
keys (to
83