Installation; Transport And Storage; Unpacking; Installation Location - GRUNDFOS ALLDOS Oxiperm C 164 Series Operation And Service Manual

6

Installation

6.1 Transport and Storage

6.2 Unpacking

6.3 Installation Location

22
WARNING
!
● Transport system carefully.
❏ Dry, cool storage location. Do not expose to direct sunlight!
®
The Oxiperm C 164 is intensively checked in the factory, and delivered ready for
connection.
●
Check for damage.
• Do not install or connect damaged systems!
● When unpacking, look for loosely packed components.
● Install as soon as possible following unpacking.
PACKAGING
NOTE
The installation location for the Oxiperm
following requirements:
❏ The permissible ambient temperature of +5 to +40 °C must be guaranteed.
❏ The installation location must be vibration-free and isolated fireproof from
other rooms.
NOTE
Heavy system!
Only use suitable lifting and transport equipment!
Only transport system when empty!
Retain packaging material, or dispose of according to
local regulations.
The applicable local or country-specific regulations
must be observed when selecting and designing the
installation location for the chlorine dioxide system.
The accident prevention regulations UVV of April 1979
apply in the Federal Republic of Germany.
®
C chlorine dioxide system must fulfil the
Reference to the dangers when using the Oxiperm
C164 chlorine dioxide system and to the relevant
precautionary measures must be provided using
appropriate signs at access points to the system
rooms and to the associated chemical storage rooms.
Oxiperm 164 150-2500 g en
®
15.710010-V5.0