Safety Information; Use Of The System; Obligations Of Owner; Avoidance Of Danger - GRUNDFOS ALLDOS Oxiperm C 164 Series Operation And Service Manual

2

Safety Information

2.1 Use of the System

2.2 Obligations of Owner

2.3 Avoidance of Danger

8
Oxiperm ® C 164 is used to generate a chlorine dioxide solution within the context
of the possible applications described in this manual.
WARNING
!
The owner of the plant is responsible for
❏ training of operating personnel and
❏ implementation of regular maintenance.
WARNING
!
Other applications are considered as non-approved,
and are not permissible. Grundfos Alldos cannot be
held liable for any damage resulting from such use.
Before starting up, it is essential that you read the
Grundfos Alldos information document "Function and
safety of chlorination systems".
Danger of explosion!
The permissible temperature ranges for process water
and chemicals must not be violated!
Observe the safety information for the used chemicals!
Work on the system must only be carried out at
standstill and with the master switch switched off!
Do not open the device components! Cleaning,
maintenance and repairs must only be carried out by
specialists, authorized by Grundfos Alldos!
Oxiperm 164 150-2500 g en
15.710010-V5.0