Mode Selection - GRUNDFOS ALLDOS Oxiperm C 164 Series Operation And Service Manual

Oxiperm 164 150-2500 g en

8.2 Mode selection

15.710010-V5.0
Oxiperm 164 chlorine dioxide installations can be used in four different modes:
❏
Batch mode
❏
Current input
❏
Contact input
❏
Manual control
❏
Target value - external
NOTE The preset mode is displayed flashing; if necessary
select a new mode.
NOTE When "Manual Control" is selected, the installation can
only be started in "manual mode". If the installation is
started in automatic mode, an alarm message appears,
and the installation cuts out.
Main menu
Display indicator:
● Use the "arrow right" button in the main menu to switch to page 2
Display indicator:
● Press "F1" to switch to the "Installation Selection" menu
Display indicator:
● Press "F2" to switch to the "Mode" menu
Display indicator:
(Page 1)
if necessary, use the arrow button to scroll to page 2
Display indicator:
(Page 2)
NOTE The "Target value - external" menu option is only
visible if a bus system has been selected in the "Basic
Settings/Bus Options" menu!
Main menu
1 Automatic
2 Manual
3 Logbook >
Main menu <
1 Installation selection
2 Basic settings
3 Service mode >
Installation selection
1 Installation type
2 Mode
Mode
1 batch operation
2 Current input
3 Contact input >
Mode <
1 Manual control
2 Target value - external
55