Channel Power Measurements - Keysight X Series Measurement Manual

Making MSR Measurements
MSR Downlink Signal Measurement

Channel Power Measurements

This section explains how to make a Channel Power measurement on a MSR
downlink signal. This test measures the total RF power present in the channel.
The results are shown in a graph window and in a text window. For more
information on this measurement, see
Concepts" on page
For signal setting, see
Measurement Procedure
Step
1. Perform the common
configuration.
2. Initiate the channel
power measurement.
Figure 2-9 MSR Downlink Channel Power Measurement Result - Power Results View
3. Select Carrier Info view.
Keysight N9083A & W9083A Measurement Guide
54.
"Setting the Downlink Signal" on page
Action
"Common Measurement
See
Procedure (Downlink)" on
page 16
.
Meas Channel Power
Press ,
View/Display Carrier
Press ,
Info
. This view contains the spectrum
trace and the carriers information table,
Figure 2-10
see .
"Channel Power Measurement
Notes
It is not necessary if you already did it in other
measurements.
.
You can choose to display offset or absolute
frequency under the menu Carrier Info.
14.
23