Keysight X Series Measurement Manual page 83

Concepts
MSR Measurement Concepts
:DISPlay:RHO:VIEW2:WINDow2:TRACe:X[:SCALe]:RLEVel
:DISPlay:RHO:VIEW2:WINDow2:TRACe:X[:SCALe]:RPOSition
:DISPlay:RHO:VIEW2:WINDow2:TRACe:Y[:SCALe]:COUPle
:DISPlay:RHO:VIEW2:WINDow2:TRACe:Y[:SCALe]:PDIVision
:DISPlay:RHO:VIEW2:WINDow2:TRACe:Y[:SCALe]:RLEVel
:DISPlay:RHO:VIEW2:WINDow2:TRACe:Y[:SCALe]:RPOSition
:DISPlay:RHO:VIEW2:WINDow3:TRACe:X[:SCALe]:COUPle
:DISPlay:RHO:VIEW2:WINDow3:TRACe:X[:SCALe]:PDIVision
:DISPlay:RHO:VIEW2:WINDow3:TRACe:X[:SCALe]:RLEVel
:DISPlay:RHO:VIEW2:WINDow3:TRACe:X[:SCALe]:RPOSition
:DISPlay:RHO:VIEW2:WINDow3:TRACe:Y[:SCALe]:COUPle
:DISPlay:RHO:VIEW2:WINDow3:TRACe:Y[:SCALe]:PDIVision
:DISPlay:RHO:VIEW2:WINDow3:TRACe:Y[:SCALe]:RLEVel
:DISPlay:RHO:VIEW2:WINDow3:TRACe:Y[:SCALe]:RPOSition
[:SENSe]:RHO:AVERage:TCONtrol
[:SENSe]:RHO:AVERage:TYPE
[:SENSe]:RHO:TRIGger:SOURce
1xEV-DO Format Parameter List
Since most parameters are the same as those used in the original
measurement, the SCPI commands in the original measurement can be used in
this measurement by converting the measurement node.
The following SCPI commands in the 1xEV-DO application are converted for
this measurement as follows:
Parameter Name
Physical Layer Subtype
The following SCPI commands in the 1xEV-DO Mod Accuracy measurement
are converted for this measurement as follows:
SCPI Command in Mod Accuracy
[:SENSe]:RHO[:BTS]:AVERage:COUNt
[:SENSe]:RHO:MS:AVERage:COUNt
[:SENSe]:RHO[:BTS]:AVERage[:STATe]
[:SENSe]:RHO:MS:AVERage[:STATe]
Keysight N9083A & W9083A Measurement Guide
SCPI Command in 1xEV-DO mode
[:SENSe]:RADio:PLSubtype
SCPI Command in 1xEV-DO Format Parameter List
[:SENSe]:RADio:FORMat:EVDO{1:3}:PLSubtype
SCPI Command in this measurement
[:SENSe]:CEVM:EVDO:AVERage:COUNt
[:SENSe]:CEVM:EVDO:AVERage[:STATe]
83