Keysight X Series Measurement Manual page 8
Signal analyzers n9083a & w9083a multi-standard radio measurement application
Hide thumbs
Also See for X Series:
- User reference (2852 pages) ,
- Programmer's reference manual (2650 pages) ,
- User & programmers manual (1529 pages)
Table of Contents
Advertisement
About the MSR Measurement Application
— E-UTRA and UTRA FDD are names of radio formats defined and used in the
— The Multi-Standard Radio mode needs a license N9083A-1FP on the
Table 1-1
MSR Related Licenses
Rad io Format
GSM/EDGE
W-CDMA
LTE FDD
LTE TDD
cdma2000®
1xEV-DO
TD-SCDMA
— If you need to make valid measurements on Multi-Standard Radio signal
8
3GPP documents. In this application, LTE and W-CDMA are used instead of
E-UTRA and UTRA.
X-Series instrument. It requires licenses of the other modes to enable Radio
Formats.
Required Option
N/W9071A-2FP
GSM/EDGE Measurement Application
N/W9071A-3FP
EDGE Evolution Measurement Application
N/W9073A-1FP
W-CDMA Measurement Application
N/W9073A-2FP
HSDPA/HSUPA Measurement Application
N/W9073A-3FP
HSPA+ Measurement Application
N/W9080A-1FP (Windows XP) or N/W9080B-1FP (Windows 7)
LTE Measurement Application
N/W9082A-1FP (Windows XP) or N/W9082B-1FP (Windows 7)
LTE TDD Measurement Application
N/W9072A-2FP
cdma2000 Measurement Application
N/W9076A-1FP
CDMA 1xEVDO Measurement Application
N/W9079A-1FP
TD-SCDMA Measurement Application
bandwidths greater than 10 MHz, WB (25MHz or wider) option needs to be
installed in PXA/MXA/EXA/CXA.
Keysight N9083A & W9083A Measurement Guide
Advertisement
Table of Contents
