Keysight X Series Measurement Manual page 42

Making MSR Measurements
MSR Downlink Signal Measurement
Step
Figure 2-22 MSR Downlink Conformance EVM - Format Parameter List
4. Recall EVM setup.
42
Action
Recall, Data, Param Set
Press
then choose the format and
parameter set and Open...
open dialog appears. Select the
appropriate file under params directory
and click open. This will apply the EVM
settings quickly. The other parameters
will not be changed. At the bottom of
the screen, there is a message to
indicate which mask file is recalled. In
this example,
LTEFDD-TM1.1-BW5MHz.fps is used.
Notes
If you have parameter set file for other modes,
you can also use the same way to recall the
setup for their parameter list automatically.
,a file
The measurement result should look like
Figure 2-20
.
Keysight N9083A & W9083A Measurement Guide