Format Parameter List In Mode Setup - Keysight X Series Measurement Manual

Signal analyzers n9083a & w9083a multi-standard radio measurement application
Hide thumbs Also See for X Series:
Table of Contents

Advertisement

Concepts
MSR Measurement Concepts
Carrier parameters are dynamically calculated using values of other
parameters under Carrier Config Presets menu such as Max RF Bandwidth and
max carrier of each radio format. Presets of format parameter set and
measurement local parameters related to the limit calculations in ACP and
SEM are done with partial state files provided with the FW.
The partial preset for carrier configuration is initiated every time when a value
of any parameter under Carrier Config Presets is changed. For example, when
TC1a (FDD) is selected with Max BS RF Bandwidth 40MHz, eight W-CDMA
carriers are placed by default. Then if Max BS RF Bandwidth is reduced
30MHz, the partial preset is initiated to put six W-CDMA carriers.

Format Parameter List in Mode Setup

All parameters for each radio format can be modified in Format Parameter List
in Mode Setup individually. There are three Format Parameter Lists for each
radio format. You can assign one Format Parameter List to each carrier.
Basically, parameters are based on the measurement in each application as
follows:
Original Application / Measurement
GSM/EDGE / EDGE EVM
W-CDMA / Mod Accuracy
TD-SCDMA / Mod Accuracy
LTE FDD / Conformance EVM
LTE TDD / Conformance EVM
cdma2000 / Mod Accuracy
1xEV-DO / Mod Accuracy
However, some parameters are from the original application's mode
parameters and some are newly added.
If you have a set of SCPI lists to set up the original measurement, you can
easily convert it for this measurement by simply replacing the measurement
node name with "RADio:FORMat:<Radio Format node>" as follows:
Radio Format
GSM/EDGE
Keysight N9083A & W9083A Measurement Guide
Carrier parameters under Configure Carriers
Format set parameters under Mode Setup, Format menu
Offset/Limits of ACP, SEM (Limit Preset)
SCPI node in Original
Measurement
:EEVM
Measurement SCPI node of Original
Measurement
EEVM
RHO
EVM
CEVM
CEVM
RHO
RHO
Radio Format node
:RADio:FORMat:GSM{List Index}
69

Advertisement

Table of Contents
loading

This manual is also suitable for:

N9020aN9010aN9000aN9030a

Table of Contents