Keysight X Series Measurement Manual page 70
Signal analyzers n9083a & w9083a multi-standard radio measurement application
Hide thumbs
Also See for X Series:
- User reference (2852 pages) ,
- Programmer's reference manual (2650 pages) ,
- Measurement manual (225 pages)
Table of Contents
Advertisement
Concepts
MSR Measurement Concepts
W-CDMA
TD-SCDMA
LTE FDD
LTE TDD
cdma2000
1xEV-DO
For example,
GSM/EDGE mode – Frequency Error Tolerance Range in the EDGE EVM
measurement
--> [:SENSe]:RADio:FORMat:GSM1:FERRor:TRANge (convert node)
LTE mode – Detection in the Conformance EVM measurement
-->
For parameters from the original application's mode, you need to convert or
insert the SCPI node individually. For example,
GSM/EDGE mode – Mod Scheme in the GSM/EDGE mode
-->
LTE mode - Spectrum in the LTE mode
-->
See the details about each format parameter list:
"LTE FDD Format Parameter List" on page 70
"W-CDMA Format Parameter List" on page 73
"GSM/EDGE Format Parameter List" on page 76
"cdma2000 Format Parameter List" on page 81
"1xEV-DO Format Parameter List" on page 83
LTE FDD Format Parameter List
Since most parameters are the same as those used in the original
measurement, the SCPI commands in the original measurement can be used in
this measurement by converting the measurement node.
70
:RHO
:EVM
:CEVM
:CEVM
:RHO
:RHO
[:SENSe]:EEVM:FERRor:TRANge
[:SENSe]:CEVM:PROFile:AUTO:DETect
[:SENSe]:RADio:FORMat:LTEFdd3:PROFile:AUTO:DETect (convert node)
[:SENSe]:SYNC:NORMal:MODulation
[:SENSe]:RADio:FORMat:GSM1:SYNC:NORMal:MODulation (insert node)
:SPECtrum
[:SENSe]:RADio:FORMat:LTEFdd3:SPECtrum (insert node)
:RADio:FORMat:WCDMa{List Index}
:RADio:FORMat:TDSCdma{List Index}
:RADio:FORMat:LTEFdd{List Index}
:RADio:FORMat:LTETdd{List Index}
:RADio:FORMat:CDMA{List Index}
:RADio:FORMat:EVDO{List Index}
Keysight N9083A & W9083A Measurement Guide
Advertisement
Table of Contents
