Table of Contents
Advertisement
8.96 ^MT MEDIA TYPE
Format: ^MTa
a = Media type
T : Ribbon
D : Thermal paper
Default: "RIBBON" in the Z-MODE parameter
When omitted: This command is ignored.
*1
If "MEDIA TYPE" in the Z-MODE parameter is set to 'DISABLE,' this command is ignored and the
"RIBBON" value in the Z-MODE parameter is used.
*2
The set value after this command is received varies depending on the "RIBBON" value in the Z-
MODE parameter.
Received command
MTD
MTT
For the LE840D, a value set for this command is ignored regardless of the Z-MODE parameter setting,
and it always behaves in the same way as "D: Thermal paper".
Since the LE840D is a direct thermal printer, it always behaves in the same way as "WITHOUT
RIBBON".
Value of "RIBBON"
Other than WITHOUT RIBBON H
Other than WITH RIBBON SAVE
- 135 -
Set value
WITHOUT RIBBON
WITH RIBBON
Advertisement
Table of Contents
