Oki LE850 Technical Reference page 102

b : No paper flag
c : Pause flag
dddd : Label length
eee : Number of formats in receive buffer
f : Buffer full flag
g : Communication diagnosis mode flag
h : Command analysis flag
Iii : Not in use
j : Broken RAM flag
k : Temperature range (lower limit) flag
l : Temperature range (upper limit) flag
String 2 = <STX>mmm,n,o,p,q,r,s,t,uuuuuuuu,v,www<ETX><CR><LF>
mmm : Function setting
mmm = m7 m6 m5 m4 m3 m2 m1 m0
m0: Printing mode
0 = Direct thermal printing
1 = Thermal transfer printing
m4 m3 m2 m1 = Not in use All:0
m5: Dump mode flag
0 fixed
m6: Sensor information
0 fixed
m7: Paper type
0 = Cutter
1 = Tear-off
* After using bit representation for each setting, the numeric value obtained from all bits is
saved in mmm.
E.g.
Setting: Direct thermal printing, Tear-off
Bit: 10000000 -> 128 is saved in mmm.
n : Not in use
o : Head up flag
p : No ribbon flag
q : Thermal transfer mode flag
r : Printing mode
s : Print width mode
t : Issuance waiting flag
uuuuuuuu : Remaining labels
0: Paper present
1: No paper
0: Not in pause
1: In pause
10 to 15000
Fixed value (0)
0: Buffer not full
Fixed value (0)
0: Not under analysis
Fixed value (0)
Fixed value (0)
Fixed value (0)
Fixed value (0)
0: Head closed
1: Head open
0: Ribbon present
1: No ribbon
0,3: Direct thermal
1,2: Thermal transfer
0: Rewind
1: Peel Off
2: Tear Off
3: Cutter
4: Applicator
Fixed value (6)
0: Not waiting for peel-of
1: Waiting for peel-off
0 to 99999999
- 100 -
1: Buffer full
1: Under analysis
Fixed value (0)