Cd Or ~Cd Change Delimiter - Oki LE850 Technical Reference

8.25 ^CD OR ~CD CHANGE DELIMITER

Format: ^CDa or ~CDa
Change delimiter ',' (0x2c)
x = Delimiter
Any character code from 0x20 to 0x7F
Non-omissible
Default: "DELIMITER CHAR" in the Z-MODE parameter
* The supported character codes differ from those for Zebra.
*1 When a job is cancelled while parameters are not saved by the JU command, the parameters
specified by this command will not be taken over after the job is cancelled but "reset."
- 58 -