Table of Contents
Advertisement
e = Destination setting
E-mail address (unsupported)
IP address
SNMP trap (unsupported)
IP or IPX address (unsupported)
When omitted: Destination information is not updated.
Only when 'TCP/TP' or 'UDP/IP' is selected for the destination, the destination information is
updated as IP address information.
f = Port number
When omitted: Port number information is not updated.
Only when 'TCP/TP' or 'UDP/IP' is selected for the destination, the port number information is
updated
*1
While the "Print job completed" message is sent when printing of the number of labels specified
with ^PQ command is completed, if the head check interval is set with ^PQ, the message is sent for
every label.
*2
Regarding information on errors including head disconnection error, multiple statuses cannot be
obtained at one time.
- 166 -
Advertisement
Table of Contents
