Cc Or ~Cc Change Caret - Oki LE850 Technical Reference

8.24 ^CC OR ~CC CHANGE CARET

Format: ^CCx or ~CCx
Change caret '^' (0x5E)
x = Prefix
Any character code from 0x20 to 0x7F
Non-omissible
Default: "FORMAT PREFIX" in the Z-MODE parameter
* The supported character codes differ from those for Zebra.
*1 When a job is cancelled while parameters are not saved by the JU command, the parameters
specified by this command will not be taken over after the job is cancelled but "reset."
- 57 -