Table of Contents
Advertisement
8.88 ^LS LABEL SHIFT
Format: ^LSa
a = Shift left value
-9999 to 9999 dots
Default: "LABEL SHIFT" in the Z-MODE parameter
"Label shift" in the default setting file is ignored.
When omitted: This command is ignored.
*1
This command always shifts a label to the left when a positive value is set.
If ^PO command is called later, the label shift to left is applied to the later commands.
(The printing before this command is not re-corrected.)
*2
The sum of the shift left values set with ^LS, ^FO, ^FT and ^LH commands can range from 0 to
3000.
- 127 -
Advertisement
Table of Contents
