Table of Contents
Advertisement
8.56 ^GS GRAPHIC SYMBOL
Format: ^GSo,h,w
o = Rotation direction
N : 0°
R : 90°
I
: 180°
B : 270°
Default: N
When omitted: Value of ^FW
h = Character height (in dots)
0 to 32000 dots
Default: 24
When omitted: Character width if specified; if not specified, the value set in ^CF.
w = Character width (in dots)
0 to 32000 dots
Default: 24
When omitted: Character height if specified; if not specified, the value set in ^CF.
*1
The supported magnification factor range is from 1 to 9.5 (9.5 if the pitch is 9.5 or larger.)
*2
When the character base point is at the lower position due to 90° or 180° rotation setting, printing is
performed with the basis at the character top with Zebra, while subscript printing is performed with
the basis at the character bottom with Oki Data..
*3
The justification information from FO, FT, and FW is ignored in this command.
- 90 -
Advertisement
Table of Contents
