Selection Of Format Prefix; Selection Of Delimiter Character - Oki LE850 Technical Reference

5.13 SELECTION OF FORMAT PREFIX

FEED
RESTART
Select a number from 0 through 9 for an applicable digit by pressing the [FEED] or [RESTART] keys.
Pressing the [PAUSE] key determines the value for the selected digit, then the cursor moves to the next
digit. (After setting a value for the last digit, the format prefix takes effect and the next parameter is
shown.)
While the Zebra ^CC and ~CC command parameters are used as control characters for command
identification, when the ^CC and ~CC commands are not sent to the printer, this setting is used as
control characters for command identification.
NOTE: This is the same parameter as the "FORMAT PREFIX" provided in the system mode of the
Zebra printer.
NOTE: Displayed characters may be different from the ones shown in the system mode of the Zebra
printer.

5.14 SELECTION OF DELIMITER CHARACTER

FEED
RESTART
Select a number from 0 through 9 for an applicable digit by pressing the [FEED] or [RESTART] keys.
Pressing the [PAUSE] key determines the value for the selected digit, then the cursor moves to the next
digit. (After setting a value for the last digit, the delimiter character takes effect and the next parameter
is shown.)
While the Zebra ^CD and ~CD command parameters are used as control characters for command
identification, when the ^CD and ~CD commands are not sent to the printer, this setting is used as
control characters for command identification.
NOTE: This is the same parameter as the "DELIMITER CHAR" provided in the system mode of the
Zebra printer.
NOTE: Displayed characters may be different from the ones shown in the system mode of the Zebra
printer.
0
1 00 to FF HEX
(00-1F HEX are not supported.)
E
F
0
1 00 to FF HEX
(00-1F HEX are not supported.)
E
F
- 22 -