Table of Contents
Advertisement
[PAUSE]
LABEL WIDTH
104.0 mm
[PAUSE]
RIBBON
WITH RIBBON
[PAUSE]
PRINT MODE
NO CUT
[PAUSE]
SENSOR
TRANS.
[PAUSE]
PRINT SPEED
3 inch/sec
[PAUSE]
MAXIMUM LENGTH
0500.0 mm
[PAUSE]
POWER ON CALIB
CALIBRATE
[PAUSE]
HEAD CLOSE CALIB
CALIBRATE
[PAUSE]
(15) Press the [PAUSE] key.
(16) Label width setting
Set
a
value
[RESTART] key.
use the [PAUSE] key.
(17) Press the [PAUSE] key.
(18) Ribbon type setting
Select a ribbon type using the [FEED] or
[RESTART] key.
(19) Press the [PAUSE] key.
(20) Issue mode setting
Select an issue mode using the [FEED] or
[RESTART] key.
(21) Press the [PAUSE] key.
(22) Sensor type setting
Select a sensor type using the [FEED] or
[RESTART] key.
(23) Press the [PAUSE] key.
(24) Print speed setting
Select a print speed using the [FEED] or
[RESTART] key.
(25) Press the [PAUSE] key.
(26) Max. print length setting (for calibration)
Set
a
value
[RESTART] key.
use the [PAUSE] key.
(27) Press the [PAUSE] key.
(28) Calibration after power on setting
Select a printer operation using the [FEED]
or [RESTART] key.
(29) Press the [PAUSE] key.
(30) Calibration after head close setting
Select a printer operation using the [FEED]
or [RESTART] key.
(31) Press the [PAUSE] key.
- 12 -
using
the
[FEED]
To move the cursor,
using
the
[FEED]
To move the cursor,
or
or
Advertisement
Table of Contents
